BlendJet Not Charging, Flashing Red or Not Working? What To Do

BLENDi Pro+ portable blender with a green smoothie by a kitchen window

BlendJet Owner Help

BlendJet Not Charging, Flashing Red or Not Working? Here Is What To Do

★★★★★4.7 stars from 1,122 Pro+ reviews

BlendJet Inc. has gone out of business, so there is no BlendJet support, repair or parts program to call. Before you try anything, check whether your BlendJet 2 is part of the December 2023 recall. If it is, stop using it. If it is not, the fixes below solve most charging, red light and blending problems on a portable blender.

  • A separate company with its own cups, lids and parts, here since 2016
  • Pro+ crushes ice in about 20 seconds, 120W motor
  • About 14 blends per charge, USB-C
  • Former BlendJet owners save 25% with code SWITCH25
$69.99$52.49 with code SWITCH25
Shop Pro+ With 25% Off
30-day money-back guarantee1-year warrantyShips from the USA

Step 1: Check the BlendJet 2 Recall

On December 28, 2023, the U.S. Consumer Product Safety Commission announced a recall of about 4.8 million BlendJet 2 portable blenders for fire and laceration hazards. The recall covers serial numbers 5201000000 through 5542999999. The serial number is printed on the bottom of the base.

The CPSC later reported that BlendJet Inc. had gone out of business and that the recall remedy is no longer available. If your serial number is in the recall range, stop using the blender and do not charge it. Read the CPSC recall notice.

BlendJet Not Charging

If your blender is not in the recall range, try these in order:

  1. Change the cable and the plug. Most charging problems are a worn cable or a weak USB plug. Try a different cable and a wall plug, not a laptop port.
  2. Clean the charging port. Unplug it, then use a dry toothbrush or a wooden toothpick to remove dried smoothie or dust from the port. Never use water or metal.
  3. Let it dry completely. If water got into the base, let it dry for 24 hours before you charge it.
  4. Charge it for a full cycle. Leave it plugged in for at least 3 hours before you decide it is dead.
  5. Check the battery age. Rechargeable batteries wear out. A blender that is several years old and holds only one or two blends is near the end of its battery life.

BlendJet Flashing Red

On most portable blenders, a flashing red light means one of four things:

  • The battery is low. Charge it fully and try again.
  • The jar is not attached all the way. Most portable blenders have a safety switch that stops the motor if the cup is not screwed on tight. Unscrew the jar, check the threads and screw it on again.
  • The motor is overheated. Let it rest for 10 to 15 minutes before the next blend.
  • The blades are jammed. Empty the cup, check for ice or frozen fruit stuck under the blades, and add more liquid next time.

BlendJet Not Blending Ice or Frozen Fruit

  • Put liquid in first, up to about one third of the cup.
  • Use smaller ice cubes and add them last.
  • Stay under the max fill line.
  • Blend on a full charge.
  • If the blades look bent, chipped or loose, stop using the blender.

How to Use a BlendJet or Any Portable Blender

  1. Charge the base fully before the first use.
  2. Add liquid first, then soft ingredients, then ice or frozen fruit.
  3. Screw the jar onto the base until it is tight.
  4. Press the power button to start a blend cycle, and blend again if you see chunks.
  5. Clean it right away: add warm water and a drop of soap, blend, rinse and let it air dry upside down.

Do BLENDi Parts Fit a BlendJet?

No. BLENDi is a separate company, founded in 2016. BlendJet cups and lids do not fit BLENDi blenders, and BLENDi parts do not fit a BlendJet, because the threads are different. BLENDi sells its own replacement parts for the Pro+ and Lite.

The BlendJet Replacement Former Owners Choose

Many BlendJet owners now use the BLENDi Pro+. It is the same idea, a 17oz cordless blender you charge by USB-C, with a 120W motor that crushes ice in about 20 seconds, a travel base that turns the cup into a water bottle, and a 1-year warranty from a company that is still here. Use code SWITCH25 for 25% off.

★★★★★

"I was looking for a replacement for my BlendJet and came across Blendi. So far it has been a good choice as my husband and I make smoothies everyday. It seems to have sharper blades than my previous one which is much nicer, too, when using frozen fruit."

Julie A., verified buyer
★★★★★

"I use this almost everyday. It's easy and you can actually crush ice. Makes a great smoothie."

Sherry G., verified buyer
★★★★★

"I wasn't quite sure what to expect in such a small package but I was pleasantly surprised with the power and quality of this device. We'll be using this often to create more than just beverages. Salad dressings, marinades, you name it."

Ben A., verified buyer

BlendJet Questions

Is BlendJet still in business?

No. BlendJet Inc. ceased operations in 2025, and the CPSC has reported that the company is out of business and that the BlendJet 2 recall remedy is no longer available.

Why is my BlendJet flashing red?

On most portable blenders a flashing red light means the battery is low, the jar is not screwed on all the way, the motor overheated or the blades are jammed. Charge it, reseat the jar, let it rest and add more liquid. If your BlendJet 2 serial number is between 5201000000 and 5542999999, it is recalled, so stop using it.

Why won't my BlendJet charge?

Try a different cable and a wall plug, clean the charging port with a dry brush, make sure the base is completely dry, and charge for at least 3 hours. If it still will not charge, the battery may be worn out.

How long does a portable blender take to charge?

Most portable blenders take 2 to 4 hours for a full charge. The BLENDi Pro+ takes 2 to 3 hours by USB-C and gives about 14 blends per charge.

Can I still get BlendJet replacement parts?

BlendJet has gone out of business, so official BlendJet parts are no longer sold by the company. BLENDi parts do not fit BlendJet blenders.

What is the best BlendJet replacement?

The BLENDi Pro+ is the closest replacement: a 17oz cordless USB-C blender with a 120W motor that crushes ice, a travel bottle base and a 1-year warranty. Former BlendJet owners get 25% off with code SWITCH25.

More for BlendJet Owners

Switch to BLENDi and Save 25%

Use code SWITCH25 on the Pro+ at checkout.

Get 25% Off the Pro+
30-day money-back guarantee1-year warrantyShips from the USA

Sources: CPSC BlendJet 2 recall notice; ChannelNews on the ACCC update (Aug 2025). BlendJet is a trademark of its owner. BLENDi is not affiliated with BlendJet. The troubleshooting steps are general advice for portable blenders.